UCTRONICS High Precision Handheld LC Inductor Capacitor Tester, Inductive Capacitance Meter Kit, 1pF-100mF, 1uH-100H

Only 991 left

Item Description:

UCTRONICS handheld LC meter U6228 is based on the LC resonant principle, and it adds precision measurement calculation of high-speed microcontroller, so that the meter has the advantage of wide measuring range and high precision, especially suitable for creating radio frequency filters, traps and other radio related stuff. It is very good when dealing with <10pF or uH where other measurement items fall down.

  • Supply Voltage: 5V
  • Power Supply: Φ5 DC power supply and mini USB cable (both of them included), or 4*AA batteries (not included)
  • Dimensions (L x W x H): 150 x 89 x 29mm
  • Weight: 198g


Measurement Range:

  • C -----Capacitance (0.01pF-10uF)
  • L -----Inductance (0.001uH-100mH)
  • Hi.L -----Large inductance (0.001mH-100H)
  • Hi.C -----Large capacitance (1uF-100mF)


  • Capacitance mode -----open circuit calibration;
  • Inductance mode -----short circuit calibration.

Frequency display:

  • Press the function button while testing, the current frequency will be displayed.


Mode “C”: measure small capacitance

  • Accuracy: 1pF~1uF--1%; 1uF~10uF--5%
  • Resolution: 0.01pF

Mode “L”: measure small inductance

  • Accuracy: 1uH~100mH--1%
  • Resolution: 0.001uH

Mode “Hi.L”: measure large inductance

  • Accuracy: 100mH~1H--1%; 1H~100H--5%
  • Resolution: 0.001mH

Mode “Hi.C”: measure large capacitance

  • Accuracy: 1uF~100mF--5%
  • Resolution: 0.01uF

Test frequency:

  • Mode “C”, mode “L”~500KHz
  • Mode “Hi.L”~500Hz ~50KHz

The measurement method of large capacitance: Charge-discharge

Working temperature: 0℃-40℃

Working humidity≤90%RH (At 40 ℃)

Package includes:

  • 1×handheld LC meter
  • 1 pair of alligator clip test leads
  • 1×LCR Kelvin alligator clip test lead
  • 1×mini USB cable
  • 1×Φ5 DC power supply
  • 1×manual
  • The capacitor under test must have been completely discharged, otherwise, the meter will be damaged.
  • It needs more time to measure a big capacitance (over 10mF, more than 1s; 100mF, about 8s).
  • If the meter needs to switch the testing mode, it should be calibrated to keep measurement accuracy.
  • For measuring the electrolytic capacitors, the selected mode should be “Hi.C”.


Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account