[Discontinued] Raspberry Pi Official Camera Module V2 with 8 Megapixel IMX219 Low Distortion Replacement
SKU
B0207+B0184
$56.99
Overview
Discontinued.
Check alternative product B0394.
Item Description:
The Raspberry Pi Camera Module v2 has a Sony IMX219 8-megapixel sensor, can be used to take high-definition video, as well as stills photographs. It's easy to use for beginners, but has plenty to offer advanced users if you're looking to expand your knowledge.
The official Raspberry Pi Camera Module V2 is a nice little camera but lacks the abilities to replace the lens, and you have to live with what comes from the factory. Is there anything we can do to customize the lens we want? The answer from Arducam is simple: if we cannot replace the lens alone, we will replace the lens-sensor combination. Arducam has designed a series of IMX219 drop-in replacement sensor modules with different lens options to add flexibilities to your Raspberry Pi Camera Module V2. This Low-Distortion M12 Lens module provides a wider Field of View (FoV) and better image quality under certain scenarios.
Specifications:
Raspberry Pi Official Camera Module v2
- 3280 (H) x 2464 (V) active pixel count
- supports 1080p30, 720p60 and VGA90 video modes.
- works with all models of Raspberry Pi 1, 2, 3 and 4.
- recommended Power Supply: DC 5V, above 1.8A
Low Distortion Replacement
- Sony 8MP IMX219 Sensor
- Optical Format: 1/4 inch
- Frame Rate: 30fps@8MP, 60fps@1080p, 180fps@720p
- Data Format: RAW8/RAW10
- EFL: 2.8mm
- F.NO: 2.8
- View Angle: 75 Deg. (Horizontal)
- Interface: MIPI CSI-2 2-lane
- IR Sensitivity: Visible light, integral IR Filter
- Focus distance: 200mm ~ infinity
Packing Including:
- Raspberry Pi Official Camera Module v2 with a 15cm original FFC cable
- 1*IMX219 low distortion replacement
- 1*50cm FFC cable for model A and B
- 1*15cm FPC cable for pi zero & w
Note: The raspberry pi shown in the picture is not included!
Additional Resources:
Write Your Own Review