[Discontinued] UCTRONICS Complete Enclosure for Raspberry Pi Cluster, with 4 Removable Mounting Brackets for Pi 4 and 2 Cooling Fans

UCTRONICS Raspberry Pi Cluster Complete Enclosure is made of aluminum alloy, designed to provide a desktop hardware solution for RPi array. The fully complete case with compact design reserved enough space for 4 RPis, 2 2.5” SSDs and ethernet switch, as well as airflow.

Each RPi mounting bracket is independent, and can be removed just by unscrewing the two screws.

Two 80mm*80mm fans cool all devices well quietly, both of them are black, help you far from light pollution.

It's your perfect solution to build a home media server, Pi NAS or media center, learn distributed computing and deployment, and private servers for numerous games.

Feature

• Complete Case - Designed to house Raspberry Pi 4 B boards, 2.5” SSDs and ethernet switch in a cluster configuration in both a small and convenient form factor, please note it doesn't support Raspberry Pi 3B/B+ and the older models.
• Front Removable - Each baseplate is independent so as to easily slide in-and-out, just fixed with two screws, allowing you very convenient and quick access to each node within the cluster for maintenance.
• Full Metal Built - Every piece is made of a nice and sturdy gauge of 1.2mm carbon steel, matte black powder coat finish, have nothing breaking off, paint chips, sharp exposed edges (plate corners are rounded off smooth).
• Efficient Heat Dissipation - Dual 8cm 5V cooling fans provide enough airflow to keep your RPis cool quietly, with a convenient connector and free of light pollution, which cools all the devices in the cluster.
• Hassle-Free - Easy to assemble, just takes you a few minutes to twist the screws following the included guide, two cuts on the top panel to hold the SSD for fixing; Compact design, takes up less space, can be put in any narrow position.
• Enough Space - An opening of 6.61” x 1.26” (168mm x 32mm) for ethernet switch on the bottom, compatible with most 5 port and 8 port switches, and also leave lots of room for cable management and hide any cables from the raspberry pi's themselves.
• Option - The micro SD card adapter is coming soon, which helps you access the SD card without anything removed.

SPECS

Material: Full metal, aluminum alloy

Overall Size: 7.87"*5"*4"

Compatibility: Supports 4 x RPi 4, 2 x 2.5" SSD and 1 x 5 port or 8 port ethernet switch (please check the cuts size before ordering).

Cooling Fan

Dimension: 80mm*80mm

Operating Voltage: DC 5V

Operating Current: 0.3A

Power Consumption: 1.5W

Speed: 2875±5%RPM

Weight: 44.2g

Packing Contents

6 x Enclosure panel

4 x RPi 4 mounting bracket

2 x Cooling fan

4 x Footpad

1 x Screw pack

1 x Screwdriver

Assembly Guide

Documentation

Manual

Video