[Discontinued] Arducam 5MP 1080p Pan Tilt Zoom PTZ Camera with Base for Raspberry Pi 4/3B+/3


Discontinued, check alternative item B0167B12

  • IR Cut Switch: Switchable IR Cut through software for your day/night vision
  • Make full use of the CSI connector now that a single camera can be used to monitor more place
  • Software Control: Autofocus control, pan/tilt/zoom keyboard control supported in software
  • Base on 5MP OV5647 1080P Camera board
  • PTZ Controller Board Connector Part Number: S6B-XH-A-1


PTZ is an abbreviation for pan, tilt, and zoom and reflects the movement options of the camera, and a pan–tilt–zoom camera (PTZ camera) is a camera that is capable of remote directional and zoom control. A PTZ camera is not a still camera. Instead, it could move the camera and the lens, and that means a single camera can be used to monitor places that should be covered by multiple ones. You can save a lot of cost and time in purchasing and deploying the camera if a PTZ camera can handle the job. With its moveable lens, you will also be able to zoom the camera to see a specific area that you are interested in. To conclude, it’s “do more with less.”



  • IoT cameras
  • Robot cameras
  • Wildlife cameras
  • Cellular phones,PDAs,Toys
  • Other security and surveillance projects



Image Sensor Ominivison OV5647
Optical Size 1/4”
Active Pixels 5MP 2592×1944
Frame Rates 1080p 30 fps, 720p 60fps, 480p 90fps
Focal Length 3.2-11.1mm±5%
F.NO W:1.6-T:3.3±5%
Focus Type Front group: focus Back group: Zoom
M.O.D 0.8M
Dimension  36mm x 36mm
Pan and Tilt Range 0-180°
Zoom Range (Wide => Tele) 2317 steps 0.00396mm/step
Focus Range(Near => Far) 3009 steps 0.0047mm/step


Package Including

  • 1 x Arducam PTZ Pan Tilt Zoom Lens, assembled with a 5MP IR-CUT switchable camera board and a camera control board

  • 1 x 15-Pin FPC Cable (11.8 in/30 cm)

  • 1 x XH2.54 Jumper wire with 6Pin Female Connector (11.8 in/30 cm)

  • 1 x Base Alloy with servo

  • 1 x Black Acrylic Board

  • 12 x M3*10+6mm Nylon Standoffs

  • 8 x M3*6mm Nylon Screws

  • 8 x M3 Nuts

  • 4 x Copper standoffs for the base



  • Raspberry Pi board is not included in the package

Note on Supported Raspberry Pi Boards and OS
Platform Bookworm(rpicam) Bullseye(libcamera) Buster(raspistill)
Raspberry Pi 5    
Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W
Raspberry Pi CM3 / CM3+ / CM4
(extra carrier board required)







Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account