Arducam HM01B0 is a camera module featuring ultra-low power consumption, up to QVGA resolution, 1-bit video data interface, and line sync. This, along with other specs make it a perfect camera for building machine vision projects and Always on Serivce applications with energy-efficient MCUs. It’s designed specifically for Raspberry Pi Pico and other third-party RP2040 dev boards. It’s also the built-in camera of the Arducam Pico4ML.
Application
- Machine Vision
- Robotics
- IoT
Specs
- Ultra Low Power Image Sensor designed for Always-on vision devices and applications
- High sensitivity 3.6μ BrightSenseTM pixel technology
- 324 x 324 active pixel resolution with support for QVGA window, vertical flip, and horizontal mirror readout
- <1.1mW QQVGA resolution at 30FPS, < 2mW QVGA resolution at 30FPS
- Programmable black level calibration target, frame size, frame rate, exposure, analog gain (up to 8x), and digital gain (up to 4x)
- Automatic exposure and gain control loop with support for 50 / 60Hz flicker avoidance
- Flexible 1-bit and 4-bit video data interface with video frame and line sync
- Motion Detection circuit with programmable ROI and detection threshold with digital output to serve as an interrupt
- On-chip self oscillator
- I2C 2-wire serial interface for register access
- CSP and Bare Die sensor package option
- High CRA for low-profile module design
Documentation
Arducam HM01B0 QVGA Camera Module for Raspberry Pi Pico
Demo
Package Contents
- 1 x Arducam HM01B0 camera module