UCTRONICS DC 12V Time Delay Relay Module with Plastic Enclosure, On Delay and Off Delay for Automobile, Raspberry Pi, Industrial Control, and Other Electronic Projects

Item Description

The DC 12V time delay relay module is designed for different control systems. It can set on delay or off delay modes with the adjustable time range from 0.1s to 1h. The delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer. It can be widely used for smart home, automobile control, Arduino robotics, and other electronic projects.

Features

• Operating Voltage: DC 12V; Quiescent Current: 5.5mA; Max. Operating Current: 42mA; Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V; Max. Load Current: 10A
• Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer.
• Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please keep the jumper pins S5 open when control the AC current exceeds 220V or other DC current voltage higher than the VCC port, otherwise the module will be burnt.
• Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system.
• You'll Be Getting: A time delay relay module U6031, 2 pieces of protective case and 2 mounting screws; the plastics case keep the module free from dust and water, which is available for more applications than the separate module.

Note: Please remove the jumper cap of S5 when control the AC current or other DC current voltage rather than 12V, otherwise the module will be burnt or will not work properly.

Documentation

Manual