Skip to the beginning of the images gallery

Arducam 12MP 477P Motorized Focus High Quality Camera for NVIDIA® Jetson Nano/Xavier NX/AGX Orin/Orin Nano/Orin NX

SKU

B0273

Be the first to review this product

$79.99

Overview

Check Raspberry Pi version SKU: B0272

The same 12MP High-Quality Camera, but with smarter focus control – No more hand touching.

The intuitive focus control: Fine-tune the focus with the keyboard arrow keys.
The Automated focus control: Autofocus with OpenCV examples

Focus motor controlled via camera I2C. No hardware modification is required.

Details

Overview

This Arducam High-Quality motorized focus camera module integrates a motor that could be controlled by software for a smarter focus, and you will no longer focus the camera by screwing the lens with your bare hands. Instead, keyboard keys or OpenCV can be used to remotely control the focusing process of your HQ camera. Other than its motorized focus, it offers the same picture quality and camera controls as the Raspberry Pi High-Quality camera. However, the Arducam High-Quality Camera Modules do not require any hardware modifications to work with the Jetson Nano/Xavier NX Platform.

Currently, NVIDIA official has released the NVIDIA Jetson Orin series developer board. Based on it, we have also adapted the camera to the NVIDIA Jetson Orin kernel.

★KERNEL CAMERA DRIVER USED

This camera relies on kernel drivers to work – one kernel version, one camera driver. Please refer to the Supported JetPack Version for Different NVIDIA Jetson Platforms to ensure compatibility.

★ SUPPORTED PLATFORM DISCLAIMER

This camera is specifically designed for the official NVIDIA® Jetson™ Developer Kit by default and does not support third-party carrier boards.

★ADDITIONAL ACCESSORY INSTRUCTIONS

For the Orin Nano/Orin NX, a 22-22 pin FFC(CB023) is required. If you are using an AGX Orin, an additional camera adapter (B0473) is required.

Specifications

Lens

Focus Type	Motorized
Focal Length	3.9mm
F.NO	F2.8
Field of View(FOV)	75°(H)
Lens Mount	M12 Mount
MOD	0.3
Back Focal Length	4.49mm
Lens Dimension	Φ14×18.67mm

Electrical & Mechanical

Camera Board Size	38 × 38mm
Hole Pitch	Compatible with 29mm, 30mm, 34mm
Power requirement	with motorized motor: 3.3V/500mA max without motorized motor: 3.3V/300mA max
Peaking Current	300mA

Package Contents

1 × Arducam 12MP Motorized Focus High-Quality Camera for Jetson Nano and Jetson Xavier NX
1 × 300mm 15pin-22pin flex ribbon cable

Documentation

Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account

Still Resolution	12.3 Megapixels
Video Modes	NVIDIA Jetson Nano/Xavier NX/Orin NX/Orin Nano/AGX Orin: L4t 32.x: 4032x3040@30fps, 3840x2160@30fps, 1920x1080@60fps L4t 35.x: 4032x3040@20fps, 3840x2160@30fps, 1920x1080@60fps
Sensor Resolution	4056 x 3040 pixels
Sensor image area	6.287mm x 4.712 mm (7.9mm diagonal)
Pixel Size	1.55 µm x 1.55 µm
Optical Size	1/2.3"
IR Sensitivity	Integral IR-cut Filter, visible light only