Arducam Multi Camera Adapter Doubleplexer Stereo Module V2 for Raspberry Pi CameraV3, Raspberry Pi Zero, Pi4/3B+/3

SKU
B016601
Only 16 left
$29.99
-
+
Overview

New version of B0166.

  • Multi-Camera Solution: Designed mainly for Raspberry pi ZERO, up to two 5MP OV5647/8MP IMX219/ 12.3MP IMX477/12MP IMX708 cameras connected. No mixing allowed.
  • Alternative Work: Only one of the two cameras can be activated at a time, and they are working in alternate ways.
  • Easy to Operate: A simple software built to run two cameras.
  • Compatibility: It also can be used for other Raspberry Pi boards with minor software modifications.

Item Description:

This multi-camera adapter board is designed for Raspberry pi ZERO and let you connect two 5MP or 8MP or 12MP cameras to Pi Zero.

Only one of the two cameras can be activated at a time, and they are working in alternate ways. It cannot run two cameras at the same time, but we build a simple software which can run two cameras and make it looks like working at the same time.
But the drawback is the frame rate, and resolution will be fairly low, may be useful for surveillance.
Please note that Raspberry Pi multi-camera adapter board is a nascent product that may have some stability issues and limitations because of the cable’s signal integrity and RPi's closed source video core libraries, so use it on your own risk. This version supports 8MP Pi camera board. And it also can be used for other Raspberry Pi boards with minor software modifications.

 

Application:

  • IoT cameras
  • Robot cameras
  • Wildlife cameras
  • 3D scanner, multi camera sync solution, etc.

 

Documentation:

Additional Resources:

 

Note:

  • The default usage of this product is taking still pictures, and when it is used to store videos, the frame rate will be reduced.
  • The Raspberry Pi multi-camera adapter board is a nascent product that may have some stability issues and limitations because of the cable’s signal integrity and RPi's closed source video core libraries, so use it on your own risk.
  • For the use of remote controlling terminals, first specify the location of the image display, please run the commands shown as below:

export DISPLAY=:0

./previewOpencv

 

⚠️ Raspberry Pi Touch Display (DSI interface) Compatibility Issues:

When you use a DSI display together with this adapter, you will encounter the issue of I2C conflicts. We recommend you use HDMI displays or run headless when using this adapter.

⚠️ Camera Module Compatibility

The Arducam Multi-camera adapters ONLY support 3 kinds of camera modules by default:

  • 5MP OV5647 (V1.3)
  • 8MP IMX219 (V2.1)
  • 12MP IMX477 (HQ)
  • 12MP IMX708(Raspberry Pi Camera Module 3)

ALL other MIPI camera modules intended to be used with Arducam multi-camera adapters needs extra customization. Extra fees may occur.

 

⚠️ Resolution and Framerate Compatibility

If you need the cameras to run at a certain resolution or framerates, please request customization. Extra fees may occur.

Note on Supported Raspberry Pi Boards and OS
Platform Bookworm(rpicam) Bullseye(libcamera) Buster(raspistill)
Raspberry Pi 5    
Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W  
Raspberry Pi CM3 / CM3+ / CM4
(extra adapter board required)
 

Package Including:

  • 1 x Arducam Multi-Camera Adapter Doubleplexer Stereo Module V2 for Raspberry Pi Zero, Pi 3/3 b+, 4b
  • 1 x 73mm 15-22pin FPC cable
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account