PTZ is an abbreviation for pan, tilt, and zoom and reflects the movement options of the camera, and a pan–tilt–zoom camera (PTZ camera) is a camera that is capable of remote directional and zoom control. A PTZ camera is not a still camera. Instead, it could move the camera and the lens, and that means a single camera can be used to monitor places that should be covered by multiple ones. You can save a lot of cost and time in purchasing and deploying the camera if a PTZ camera can handle the job. With its moveable lens, you will also be able to zoom the camera to see a specific area that you are interested in. To conclude, it’s “do more with less.”
| Image Sensor | Sony IMX219 |
| Optical Size | 1/4” |
| Active Pixels | 8MP 3280(H)x2464(V) |
| Frame Rates | 1080p30, 720p60 and VGA90 video modes |
| Shutter Type | Rolling Shutter |
| Focal Length | 3.2-11.1mm±5% |
| F.NO | W:1.6-T:3.3±5% |
| Focus Type | Front group: focus Back group: Zoom |
| IR Sensitivity | Optional with additional Motorized IR-Cut filter |
| M.O.D | 0.8M |
| Dimension | 36mm x 36mm |
| Pan and Tilt Range | 0-180° |
| Zoom Range (Wide => Tele) | 2317 steps 0.00396mm/step |
| Focus Range(Near => Far) | 3009 steps 0.0047mm/step |
1 x Arducam PTZ Pan Tilt Zoom Lens, assembled with a 8MP IR-CUT switchable camera board and a camera control board
1 x 15-Pin FPC Cable (11.8 in/30 cm)
1 x XH2.54 Jumper wire with 6Pin Female Connector (11.8 in/30 cm)
1 x Base Alloy with servo
1 x Black Acrylic Board
12 x M3*10+6mm Nylon Standoffs
8 x M3*6mm Nylon Screws
8 x M3 Nuts
4 x Copper standoffs for the base
3D Drawing
