[Discontinued] Arducam 13MP MIPI Camera Module with AR1335 OBISP and M12 Mount Lens for Jetson Nano (Jetvariety ISP 13)



Check alternative product B0371

Arducam 13MP OBISP MIPI camera features onboard ISP (Image Signal Processor), it uses standard 15pin MIPI CSI-2 interface, and works seamlessly on Jetson Nano.


This camera relies on kernel drivers to work – one kernel version, one camera driver. Up or downgrading your OS leads to a kernel bump, and you’ll need to re-install a matching driver.

The newest Raspberry Pi firmware does not support the OBISP MIPI driver anymore, it is not recommended to use this camera on Raspberry Pi. For the camera already purchased, we suggest you use it on Raspberry Pi firmware released before 2021 October.

This camera can just be supported by Jetson nano and Xavier NX at present, any other Jetson boards will not be supported.



  • Cellular phones
  • Digital still cameras
  • PC cameras
  • IoT cameras


  • Resolution: High Resolution
  • Shutter Type: Rolling Shutter
  • Color Type: Color
  • IR Sensitivity: 650nm IR filter, visible light only.
  • Output Interface: 2-Lane MIPI CSI-2
  • Output Format: YUV422, RGB888
  • ISP Features: AWB, AE, Flip, Mirror, DeNoise, Gamma, Sharpness, Saturation, Contrast Digital Zoom, Digital Pan/Tilt, Speical Effects etc
  • Platform Support:  Jetson Nano


  • Sensor Type: 13MP AR1335
  • Pixel Size: 1.1um x 1.1um
  • Resolution: 4160×3120
  • Optical Size: 1/3″
  • Lens Spec: M12 Low distortion lens, EFL: 4.73mm, FoV(H): 50°, F/NO:2.2
  • Max Data Rate: 1.2Gbps/laneFrame Rate: 7fps@4160×3120, 11fps@3264×2448/3840×2160, 24fps@2560×1440, 30fps@1600×1200/1920×1080/640×480/320×240
  • Responsivity: 4.7k e/lux-sec
  • SNR(Max): 37dB
  • Dynamic Range: 69dB
  • Power Consumption: 270mW
  • Temperature Range: -10 ~ 70 degrees
  • Camera Driver: V4L2 Compliant driver for Jetson Nano
  • Board Size: 38mm x 38mm
  • Powerline Frequency:  50Hz, fixed

Package Contents

  • 1pcs Arducam 13MP OBISP Camera Module with M12 Mount Lens
  • 1pcs 15pin to 22pin ribbon cable


User Guide-OBISP 13MP Low Distortion Camera Module

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account