Overview
PTZ is an abbreviation for pan, tilt, and zoom and reflects the movement options of the camera, and a pan–tilt–zoom camera (PTZ camera) is a camera that is capable of remote directional and zoom control. A PTZ camera is not a still camera. Instead, it could move the camera and the lens, and that means a single camera can be used to monitor places that should be covered by multiple ones. You can save a lot of cost and time in purchasing and deploying the camera if a PTZ camera can handle the job. With its moveable lens, you will also be able to zoom the camera to see a specific area that you are interested in. To conclude, it’s “do more with less.”
Applications
- IoT cameras
- Robot cameras
- Wildlife cameras
- Cellular phones,PDAs,Toys
- Other security and surveillance projects
Specifications
Image Sensor | Ominivison OV5647 |
Optical Size | 1/4” |
Active Pixels | 5MP 2592×1944 |
Frame Rates | 1080p 30 fps, 720p 60fps, 480p 90fps |
Focal Length | 3.2-11.1mm±5% |
F.NO | W:1.6-T:3.3±5% |
Focus Type | Front group: focus Back group: Zoom |
M.O.D | 0.8M |
Dimension | 36mm x 36mm |
Pan and Tilt Range | 0-180° |
Zoom Range (Wide => Tele) | 2317 steps 0.00396mm/step |
Focus Range(Near => Far) | 3009 steps 0.0047mm/step |
Package Including
-
1 x Arducam PTZ Pan Tilt Zoom Lens, assembled with a 5MP IR-CUT switchable camera board and a camera control board
-
1 x 15-Pin FPC Cable (11.8 in/30 cm)
-
1 x XH2.54 Jumper wire with 6Pin Female Connector (11.8 in/30 cm)
-
1 x Base Alloy with servo
-
1 x Black Acrylic Board
-
12 x M3*10+6mm Nylon Standoffs
-
8 x M3*6mm Nylon Screws
-
8 x M3 Nuts
-
4 x Copper standoffs for the base
Note
- Raspberry Pi board is not included in the package
Documentation
- Specification
- How to use PTZ Camera with Octopi to monitor 3D printers
- Sensor Datasheet – OmniVision OV5647
- Application Note – Arducam Cameras for Raspberry Pi
- Arducam Documentation – Arducam Cameras for Raspberry Pi
Video