Overview
This 5MP NOIR pi video camera is designed for both daylight and night vision photography with build-in IR cut filter and two infrared LED illuminator boards. The IR cut filter and the infrared LEDs are automatically ON/OFF according to the light environment. The camera is fully supported all the Raspberry Pi board versions including Pi3 and Pi Zero. It can be widely used in wild life photography, agriculture NDVI applications and etc.
Applications
- Home surveillance
- Smart Robots
- Monitoring 3D printer
- Wildlife photography
- NDVI in agriculture, etc.
Features
- Day&Night Image: Built-in motorized IR-CUT Filter, switched in and out automatically based on light condition (only visible light during the daylight and infrared sensitivity during the night with IR LEDs on), has a better low light performance
- Support all Raspberry Pi Models: Support Raspberry Pi Zero & W, Pi 4 b, 3 b+, 3 b, and other A&B series
- Acrylic Holder: Customized designed for this IR-CUT camera board and IR LEDs, make the camera stand or be mounted somewhere you like
- Accessories – 2 heat sinks for IR LED boards and 1 ribbon cable for Pi Zero included. Contact Arducam for more lens options, technical support and customer services
Specifications
Sensor | Omnivision OV5647 sensor |
Optical Size | 1/4” (OV5647) |
Resolution | 5MP 2592×1944 |
Frame Rates | 1080p 30 fps, 720p 60fps, 480p 90fps |
Focal Length | 2.25mm |
Focus Distance | 30cm to infinity |
Field of View(FOV) | 130°(D), 105°(H) |
IR Sensitivity | Motorized IR Cut filter |
Power Output | 3.3V power output for IR LED |
Peaking Current | 300mA |
Dimension | 36×36 mm, 4 screw mounting holes |
Package including
- 1 x RPi IR-CUT Camera
- 2 x Infrared LED Board
- 2 x heat sink
- 1 x 15cm (5.9 inch) flat ribbon cable 15pin 1.0mm pitch to 15 pin 1.0mm pitch
- 1 x15cm (5.9 inch) flat ribbon cable 15 Pin 1.0mm pitch to 22 pin 0.5mm pitch
Note
- Raspberry Pi board is not included in the package