Item Description
As part of Project Jetvariety, which allows any camera modules to be connected to the high-speed CSI-2 connector on the Jetson Nano. Arducam just released this OV7251 monochrome global shutter camera module for Jetson Nano.This camera is based on a 1/7.5-inch Omnivision OV7251 image sensor which adopts OmniPixel3-GS™ technology to provide full-frame, sub-sampled, and windowed 8/10-bit MIPI images, and capable of operating at up to 100fps in VGA resolution with complete user control over image quality.
The sensor's global shutter and excellent low-light sensitivity allow it to be used for any application that needs gesture detection, head and eye tracking, and depth and motion detection.
Features
- Shutter Type: Global Shutter
- Color Type: Mono
- IR Sensitivity: build-in 650nm IR cut filter (Check IR sensitive version with SKU B0206)
- Interface: MIPI
- Format: RAW Bayer
- Platform Support: Jetson Nano
Specification
- Sensor type: OV7251
- Pixel size: 3 μm x 3 μm
- Resolution: 640x480
- Optical Size: 1/7.5 inch
- Lens spec: EFL: 1.3mm, F.NO: 2.2, FOV: D86.5 Deg./H72.9 Deg./V57.7 Deg., Focusing Range: 65mm ~ infinite
- Frame rate: 120fps@640 x 480, 180fps@320 x 240, 360fps@160 x 120
- Interface Type: 1-lane MIPI serial output
- Output format: RAW8/RAW10
- Board Size: 40mm x 40mm
Driver Features
- Support Gray, Y10, Y16
- Support standard V4L2 framework, Video Nodes and Controls (Exposure, Gain and depending on camera parameters)
- Support External Trigger Global Shutter Camera
- Support Single Line Driver Installation Command
- Support OpenCV Friendly and Provides Source Code Demonstration
- Support Dual Camera Synchronzation
Applications
- Cellular phones
- Toys
- Tablets
- Machine vision
- ARM/FPGA/DSP based platforms
Documentation
Package Including
- 1 pcs Arducam OV7251 MIPI 0.3MP Monochrome Global Shutter Camera Module
- 1 pcs Arducam Adapter Board for Jetson Nano
- 1 pcs 150mm 15pin 1.0mm FPC cable
- 1 pcs 73mm 15pin 1.0mm to 22pin 0.5mm pitch FPC cable
- Acrylic case for the camera module