Item Description
As part of Project Jetvariety, which allows any camera modules to be connected to the high-speed CSI-2 connector on the Jetson Nano. Arducam released this 18MP AR1820HS camera module for Jetson Nano. It incorporates ON Semiconductor 1/2.3−inch CMOS active−pixel digital imaging sensor AR1820HS with 1.25um x 1.25um A-PixHS™ BSI Pixel and can support 18-megapixel (4912H x 3684V) digital still images at 24 fps and a 1080p plus additional 27 percent pixels for electronic image stabilization (2448H x 1378V) in digital video mode at 60 fps and 1080p120 fps.
Features
- High Resolution
- Platform Support: Jetson Nano
- Support RAW8/10 bayer format
- Support standard V4L2 framework, Video Nodes and Controls (Exposure, Gain and depending on camera parameters)
- Support Single Line Driver Installation Command
- Support OpenCV Friendly and Provides Source Code Demonstration
Specification
- Sensor Type: AR1820
- Pixel Size: 1.25um x 1.25um
- Optical Size: 1/2.3−inch (4:3)
- Active Pixels: 4912H x 3684V
- Color Filter Array: RGB Bayer pattern
- Field of View (FOV):75° (H)
- Lens Spec: Low distorion M12 lens (Part Number: M23390H08)
- ADC Resolution: 12−bit, on−chip
- Frame Rate: 6.4fps@4896x3684/2432x1842/1920x1080 (MIPI-2L), 41fps@1216x920, 103fps@640x480
- Interface Type: 2-Lane MIPI
- Output Format: RAW8/RAW10 output
- Board Size: 40x40mm
Driver Features
- Support RAW8/10 bayer format
- Support Standard V4L2 framework, Video Nodes and Controls (Exposure, Gain and depending on camera parameters)
- Support Single Line Driver Installation Command
- Support OpenCV Friendly and Provides Source Code Demonstration
Applications
- Cellular phones
- PDAs
- Toys
- Other battery-powered products
- ARM/FPGA/DSP based platforms
Documentation
Package Including
- 1pcs Arducam 18MP AR1820 MIPI Camera Module
- 1pcs 150mm 15pin 1.0mm to 22pin 0.5mm pitch FPC cablee
Software Links
Arducam Jetson Nano Camera Modules