Arducam 8 MP Sony IMX219 camera module with CS lens 2718 for Raspberry Pi

Special Price $40.00 was $64.99
  • Replaceable Lens: Various CS lens options for this camera
  • IR Sensitivity: Integral IR Filter, visible light only
  • Native to Raspberry Pi: No need to install additional driver


ArduCAM team just released a 8MP Raspberry Pi compatible camera based on the same Sony IMX219 image sensor. It’s capable of 3280 x 2464 pixel static images. It attaches to Pi by the dedicated standard CSi interface.

It is supplementary for Raspberry Pi official camera in order to fulfill the demands for different lens mounts, field of view (FOV) and depth of the field (DOF) as well as the motorized IR cut filter for both daylight and night vision.

It's OK for you to choose different lens:



  • Cellular phones, PDAs, Toys
  • Other battery-powered products
  • Recording slow motion
  • Machine vision, etc.



Image Sensor IMX219
Still Resolution 8 Megapixels
Video Modes 1080p47, 1640 × 1232p41 and 640 × 480p206
Sensor Resolution 3280 × 2464 pixels
Sensor image area 3.68 x 2.76 mm (4.6 mm diagonal)
Pixel Size 1.12 µm x 1.12 µm
Optical Size 1/4"
IR Sensitivity Integral IR-cut Filter, visible light only
Supported Platform Raspberry Pi 5/4B/3B+/3/2/CM3/CM4/Zero W/Zero 2 W


Focus Type Manual Focus
Focal Length 4.0mm
F.NO F1.4
Field of View(FOV) 70°(H)
Lens Mount CS Mount


Electrical & Mechanical

Camera Board Size 36 x 36mm
Peaking Current 300mA


Package Including

  • 1 x 8 Megapixels IMX219 Sensor Camera Module with CS Mount
  • 1 x 15cm 15pin FPC cable
  • 1 x 15cm 15-22pin FPC cable


  • The package does not include any Raspberry Pi motherboard.
  • The drop-in replacement module does not include FPC cables and any camera boards. And it requires the use of the Raspberry Pi V2 camera board to function properly.
  • The lenses of all camera modules are not interchangeable. Please contact sales in advance if you need to replace them.
Note on Supported Raspberry Pi Boards and OS
Platform Bookworm(rpicam) Bullseye(libcamera) Buster(raspistill)
Raspberry Pi 5    
Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W  
Raspberry Pi CM3 / CM3+ / CM4
(extra carrier board required)



More information:

Lens specific: 

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account