Overview
Arducam PiVariety is a Raspberry Pi camera solution to take the advantage of using its hardware ISP functions. For a long time, Raspberry Pi users are limited to use the closed-source official supported camera driver and camera modules (V1/V2/HQ). Now Arducam made it possible to provide well-tuned ISP for PiVariety camera modules with Auto Exposure, Auto White Balance, Auto Gain Control, Lens Shading Correction, etc.
This B0381 is a new member of Arducam PiVariety series, which adopts a 1/2.9Inch 2MP Global Shutter sensor OV2311, assembled with a Low distortion lens.
Applications
- Augmented and virtual reality
- Drones
- 3D imaging
- Machine vision
- Industrial bar code scanning
- Industrial automation
Specifications
Image Sensor | Monochrome Global Shutter OV2311 |
Optical Size | 1/2.9” |
Resolution | 2MP 1600×1300 |
Max Frame Rate | 1600 x 1300@30fps, 1600x 1080@30fps, 1280 x 720@60fps |
Input clock frequency | 6~27 MHz |
Max S/N ratio | 37.4 dB |
Dynamic range |
68dB |
Pixel Size | 3 μm x 3 μm |
Focus Type | Manual Focus |
Field of View(FOV) | 83°(H), 67.5°(V) |
IR Sensitivity | NoIR, IR sensitive |
Output Format | 8/10-bit BW RAW |
Output Interface | 2-lane MIPI serial output |
Camera Board Size | 40mm x 40mm |
Minimum exposure time | 1 row period (11.3us at the resolution of 1600×1300 on Raspberry Pi) |
Package Including
- 1 x Arducam 2MP OV2311 ISP Camera Module
- 1 x 15cm 15-22pin Camera FPC Cable
- 1 x 15cm 22-22pin Camera FPC Cable
- 1 x acrylic case kit with assembly accessories
Note
- Raspberry Pi is not included in the package
- You need driver for this camera module, please refer to the following documentation to run it