Overview
Arducam PTZ camera is a complete solution to turn your Raspberry Pi/Jetson Nano/Xavier NX, and it is capable of remote directional and zoom control, so it could move the camera and the lens, which means a single camera can be used to monitor places that should be covered by multiple ones. You can save a lot of cost and time in purchasing and deploying the camera. What’s more, this kit is based on the IR-CUT switchable 13MP camera to get sharp imaging all day and night.
Applications
- IoT cameras
- Robot cameras
- Wildlife cameras
- Cellular phones, PDAs, Toys
- Other security and surveillance projects
Specifications
Optical Size | 1/2.3” |
Pixel Size | 1.55um x 1.55um |
Active Pixels | 12.3MP 4056(H)x3040(V) |
Frame Rates |
Frame Rate(Raspberry Pi): 2028 × 1080p50, 2028 × 1520p40 and 1332 × 990p120 NVIDIA Jetson Nano/Xavier NX/Orin NX/Orin Nano/AGX Orin: L4t 32.x: 4032x3040@30fps, 3840x2160@30fps, 1920x1080@60fps |
Shutter Type | Rolling Shutter |
Focal Length | 4.38-10.71mm±5% |
F.NO | W:1.6-T:3.3±5% |
Focus Type | Front group: focus Back group: Zoom |
Field of View(FOV) | 96° – 33° (Horizontal) |
IR Sensitivity | Optional with additional Motorized IR-Cut filter |
Dimension | 36mm x 36mm |
Pan and Tilt Range | 0-180° |
Zoom Range (Wide => Tele) | 2317 steps 0.00396mm/step |
Focus Range(Near => Far) | 3009 steps 0.0047mm/step |
PTZ Base Material | Full metal, aluminum alloy |
Shipping Weight | 480g (1.06lb) |
Overall Size | 12cm*12cm*13cm(L*W*H) |
Package Including
- 1 x Arducam PTZ Lens, assembled with a 12MP IR-CUT switchable camera board and camera control board
- 1 x Pre-assembled Metal Base with 2 Digital Servos
- 1 x 15-Pin to 22-Pin Ribbon Cable (11.8 in/30 cm)
- 1 x 22-Pin Ribbon Cable (11.8 in/30 cm)
- 1 x XH2.54 Jumper wire with 6-Pin Female Connector (11.8 in/30 cm)
- 4 x Copper Standoffs for the Base
- 1 x Black Acrylic Sheet for fixing the camera module to the U-shaped bracket
Note
- Raspberry Pi board and Jetson board are not included in the package
Documentation
- Used on Raspberry Pi
- Used on Jetson Nano/Xavier NX
- How to use PTZ Camera with Octopi to monitor 3D printers
Video
Raspberry Pi Pan Tilt Zoom Camera Guide
Jetson Nano NX Pan Tilt Zoom Camera Guide