Overview
The Arducam team now released another add-on mini camera module for Raspberry Pi series boards which is fully compatible with official one.
The board itself is tiny, at around 25mm x 24mm, which makes it perfect for mobile or other applications where size and image quality are important.
It connects to Raspberry Pi by way of a short ribbon cable.
The camera is connected to the BCM2835/BCM2836 processor on the Pi via the CSI bus, which travels along the ribbon cable that attaches the camera board to the Pi.
It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface.
This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras.
The board itself is tiny, at around 25mm x 24mm, which makes it perfect for mobile or other applications where size and image quality are important.
It connects to Raspberry Pi by way of a short ribbon cable.
The camera is connected to the BCM2835/BCM2836 processor on the Pi via the CSI bus, which travels along the ribbon cable that attaches the camera board to the Pi.
It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface.
This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras.
Application
- Cellular phones, PDAs, Toys
- Other battery-powered products
- Can be used in all Raspberry Pi platforms
Specifications
Sensor | Omnivision OV5647 sensor |
Sensor size | 1/4” (OV5647) |
Resolution | 5MP 2592×1944 |
Max Frame Rate | 1080p 30 fps |
Field of View (FOV) | 54°(H), 41°(V) |
Focus Type | Fixed Focus |
Focus Length | 3.60mm |
Focus Distance | 1 m to infinity |
Full-frame SLR lens equivalent | 35 mm |
Peak Current | 300mA |
Dimension | 25×24 mm |
Package including
- 1 x 5MP Mini Camera OV5647 Sensor 1080p 720p video for Raspberry Pi Official Board
- 1 x 15cm 15pin FPC cable
- 1 x 15cm 15pin to 22pin 0.5mm pitch FPC cable
Note
- Raspberry Pi board is not included in the package