Overview
This Arducam IMX219 fisheye lens camera module is designed mainly for Raspberry Pi V2 camera board and replace the default standard IMX219 camera module to get much wide field of view. It can be used for drone, robot, action camera and 3D scanning applications.
Applications
- Unmanned Aerial Vehicles (UAVs)
- Building Drones
- Mobile Medical Imaging
- Home Security System
- Wildlife Photograph, etc.
Specifications
Lens
Focus Type | Manual Focus |
---|---|
Focal Length | 1.3mm |
F.NO | F2.0 |
Field of View(FOV) | 175°(D)×155°(H)×115°(V), |
Lens Mount | M12 Mount |
Electrical & Mechanical
CSI-2 Data Output | 2-lane mode |
---|---|
Peaking Current | 300mA |
Package Including
- 1 x Arducam IMX219 Wide Angle Camera Module
Note
Documentations
- Sensor Datasheet – Sony IMX219
- Used on Raspberry Pi
- Used on Jetson Nano
- 3D Drawing – IMX219 Wide Angle Drop-in Replacement
- Video – Arducam 8MP IMX219 Wide Angle Camera for Raspberry Pi (No Board)
- Video – Arducam 8MP IMX219 Wide Angle NVIDIA Camera
- Blog – Arducam 8MP IMX219 Wide Angle NVIDIA Camera
- Lens Options – Arducam M12 Mount Lens Kit, Arducam Low Distortion M12 Mount Lens Kit
- 3D Drawing - Case
Lens Options:
SKU | Format | FOV on 1/4” sensor | Focal Length |
LN006 | 1/4’’ | 100° | 1.8mm |
LN008 | 1/2.5’’ | 140° | 1.56mm |
LN011 | 1/2.5’’ | 45° | 4mm |
LN012 | 1/2.5’’ | 55° | 3.6mm |
LN013 | 1/2.7’’ | 75° | 2.8mm |
LN014 | 1/2.7’’ | 90° | 2.1mm |
LN015 | 1/4’’ | 63° | 3.2mm |