UCTRONICS 3.5 Inches 480 x 320 TFT LCD Touch Screen Display
Contents
UCTRONICS 3.5 Inches 480 x 320 TFT LCD Touch Screen Display
Model: U4703
1. Introduction
UCTRONICS 3.5" TFT LCD display module is designed for Raspberry Pi zero/Pi 2 /Pi 3 Model B / B+ and can also be used on other hardware platforms with have SPI interface. The 3.5" screen is the same size as the standard Raspberry Pi model B/B+, and well mate with the Raspberry Pi boards. With its touch screen, it is suitable for portable devices and projects, and it is a replacement for a heavy and bulky HDMI monitor, keyboard and mice. The highlight of this display module, it supports plug and play without reboot the Pi, and SPI speed runs as fast as 32MHz to support games and videos.
2. Specification
Support Kernel from 4.1 to 4.9 | Support plug and play |
---|---|
Resolution: 480 x 320 pixels | Support touch screen |
Interface: SPI | Support game and video |
SPI speed: 32MHz | Automatic driver installation script |
Dimension: 55.98 x 85.60 mm | Well mate with Pi Zero, Pi B+, Pi2 and Pi3 |
3. Hardware installation
(Figure1) (Figure2)
The Figure 1 shows the display module pin out and dimension. Connect the 3.5inch LCD to the Raspberry Pi board like the Figure 2 shows. Power on the Raspberry Pi board and make sure the internet is connected properly. Note: LCD module pin1 should be aligned to Raspberry Pi board Pin1, misalign might cause damage.