UCTRONICS switching power supply and case for RIDEN RD6006/RD6006W
- For RD6006/W: A assorted bundle for RIDEN RD6006 and RD6006W, includes a switching power supply which is a 400W AC to DC power source, a CNC Housing, a cooling fan and fan's power supply board, a power socket, a power switch, wires and assembly accessories.
- Paper Instruction Included: Make it clear of assembly and wring to avoid short circuit and risk being caused.
Input: AC 110V 8A/220V 4A; Output: DC 60V 6.7A; Can also be used to power stepper motors; Please switch the input power 110V/220V of the AC to DC power source before power on avoiding damage.
- Multiple Protection Mechanism: Anti-reverse protection, overvoltage protection (OVP), overcurrent protection (OCP), overload protection (OPP), over-temperature protection (OTP).
- NOTE: 1. This bundle is unassembled; 2. RD6006/W is not included, please search for U6231 to get; 3. The wiring requests a high level of expertise, non-professionals must not operate.
Switching Power Supply
- Model of the Manufacture: S-400;
- Input: AC 110V 8A/220V 4A
- Output: DC 60V 6.7A
- Model of the Manufacture: S06A;
- Overall Size: 12.2"*6.77"*3.39"(310*172*86mm)
- This bundle is unassembled;
- The wiring requests a high level of expertise, non-professionals must not operate, therwise, there is a risk of ﬁre and explosion.
- Please check and switch the input power 110V or 220V before power on to avoid damage.
1 × 400W AC to DC power source S-400
1 × Upper cover plate
1 × Lower cover plate
4 × Wires
1 × Power supply board for fan
1 × Cooling fan
1 × Power socket AC-03
1 × Power switch KCD3
1 set assembly accessories of screws, nuts, and pads
Package Dimensions : 14.17 x 12.2 x 5.51 inches; 5.07 Pounds