In order to meet the new demands of the lens to work with Raspberry Pi High Quality Camera, Arducam selected and tested a wide range of lenses on your Rpi HQ cameras. It's now much easier for you to get the best lens you'll need, and we will keep the lens list growing in the near future. We’ve tested this lens among the many other selected on the 12MP RPi HQ Camera. No lens shading, no dark corners, decent image quality, it just works. It is another cost-effective choice that adds up to you Raspberry Pi High Quality Camera Module.
- They Just Work - We’ve tested this lens, the camera cable and the tripod stand on the 12MP RPi HQ Camera. With them, you can get decent quality image and release your hands.
- The CS-Mount Lens - Another cost-effective choice that adds up to your Raspberry Pi High Quality Camera Module, with 6mm focal length, manual focus and aperture adjustment ring.
- The Tripod Stand - Pocket size and lightweight, 1/4”-20 mounting screw, hassle-free fitting the RPi HQ Camera Board.
- The Camera Cable - 60cm/2ft length, 15 Pin 1.0mm Pitch interfaces, black color and long enough, goes well with 3D printers OctoPrint setup and Raspberry Pi High Quality Camera.
- Model No: CS2006ZM06
- Optical Format: 1/2.3"
- Focal Length: 6mm
- Aperture: F1.2
- Field of View (FOV): 65°(H)
- Focus Type: manual
- Mount: CS mount
- Back Focal Length: 7.53mm
- MOD: 0.2m
- Dimension: Φ30×31mm
- Weight: 53g
- 1pcs 1/2.3" CS-Mount 6mm Focal Length lens for Raspberry Pi
- 1pcs Tripod Stand
- 1pcs 15pin 60cm/2ft Camera Cable
You May Also Like
The lens in this bundle can also be used with Arducam 12MP IMX477 high quality camera modules, which are compatible with the Raspberry Pi, Jetson Nano and More.
Arducam High Quality Camera for Raspberry Pi>>
Arducam Complete High Quality Camera Bundle for Raspberry Pi>>
Arducam High Quality Camera for Jetson Nano>>
Arducam Complete High Quality Camera Bundle for Jetson Nano>>