Arducam IMX219 Wide Angle NoIR IR sensitive Camera Module, drop-in replacement for Raspberry Pi V2 Camera and Jetson Nano Camera

Only 649 left
Special Price $12.99 was $29.99
  • Easy to Set-up: Just detach the IMX219 module onboard and re-attach this replacement gently and carefully
  • NoIR lens: Attached with a NoIR M12 Lens which can be used under low light condition
  • Wide Application: Drones, robots, action cameras and 3D scanning applications, so on
  • Please note that you will need a IMX219 camera module before purchasing the drop-in replacement


This Arducam IMX219 NoIR IR sensitive fisheye lens camera module is designed mainly for Raspberry Pi V2 camera board and replace the default standard IMX219 camera module to get much wide field of view. It can be used for drone, robot, action camera and 3D scanning applications.


  • Cellular phones, PDAs, Toys
  • Other battery-powered products
  • Drone, robot
  • Action camera
  • 3D scanning applications
  • All Raspberry Pi platforms


Sensor Sony IMX219
Optical Size Type 1/4(Diagonal 4.60mm)
Resolution 8MP
Pixel Size 1.12μm×1.12μm
Active Pixels 3280 (H) × 2464 (V)
CSI-2 Data Output 2-lane mode
Output Format Raw8/Raw10
Frame Rates [email protected], [email protected], [email protected]
Shutter Type Rolling Shutter
Focus Type Manual Focus
Lens Type M12 Lens
F.NO 2.8
Effective Focal Length 2.5mm
Field of View(FOV) 155°(H), 115°(V), 175°(D)
IR Sensitivity without IR-cut filter, sensitive to IR light
Peaking Current 300mA

Package Including

  • 1 x Arducam IMX219 NoIR IR sensitive Wide Angle Camera Module


  • Raspberry Pi V2 camera board is needed to work with this camera module.
  • Raspberry Pi board is not included in the package
  • There is no FPC Cable included in the package


Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account