Arducam OV5647 NoIR Camera Board /w Motorized IR Cut Filter M12x0.5 Mount LS1820 Lens for Raspberry Pi 4/3B+/3

SKU
B0151
$34.99
-
+
Overview
  • High-Definition video camera for Raspberry Pi Model A or B, B+, Pi2B, Pi3B.
  • Replaceable Lens: Various M12 Lens for differnt requirement
  • Connection by a flat ribbon cable to 15-pin MIPI Camera Serial Interface (CSI) connector S5 on Raspberry Pi computer board
  • Motorized IR-CUT Switch: Onboard Motorized IR cut filter, support both visible and night vision

Overview

The Pi NoIR is a Raspberry Pi camera module with no Infrared filter for night time and low light photography using an Infrared light. Useful for wildlife research, science projects, night time security or making artistic photo’s.

This camera is developed for the application of the night vision. The Arducam OV5647 day and night camera can satisfied your requirement under different light conditions. The special struction is capable to achieve automatic IR-cut switching all-day. Attached with a M12x0.5 Mount LS1820 Lens that compatable with Raspberry Pi.

With the wide range of project Raspberry Pi’s are being used for, some users were finding that the camera was no good when it was being used in low light with an Infrared light source. Unfortunately for them the Raspberry Pi camera module has a Infrared filter built in which makes it unusable for their project. In response we come up with a camera module just for these type of projects called the Pi NoIR camera. It is the same as the standard camera module but without an IR filter.

Applications

  • Home security
  • Robot cameras
  • Wildlife cameras
  • Cellular phones,PDAs,Toys
  • Digital still cameras,etc.

Specifications

Sensor Omnivision OV5647 sensor
Optical Size 1/4” (OV5647)
Resolution 5MP 2592×1944
Frame Rates 1080p 30 fps, 720p 60fps, 480p 90fps
IR Sensitivity Motorized IR-cut filter
Camera Board Size 36mm x 36mm
Focus Type Manual Focus
Lens Type M12 Lens
Peaking Current 300mA

Package Including

  • 1 x OV5647 NoIR Camera Board /w Motorized IR Cut Filter M12x0.5 Mount Lens LS1820 for Raspberry Pi 
  • 1 x 15cm 15pin FPC cable
  • 1 x 15cm 15-22pin FPC cable

Note

  • Raspberry Pi board is not included in the package

Note for Supported Platform and OS
Platform Bookworm(rpicam) Bullseye(libcamera) Buster(raspistill)
Raspberry Pi 5    
Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W
Raspberry Pi CM3 / CM3+ / CM4
(extra adapter board required)

Documentations

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account