Arducam 2 Mega pixel MT9D112 Camera Module

SKU
B0006
Only 8 left
$9.19
-
+

Introduction


The MT9D112 has a color image sensor with a Bayer color filter arrangement and a
2-megapixel active-pixel array with electronic rolling shutter and global reset. The sensor core
readout is 10-bit and supports skipping, binning and can be flipped and/or mirrored. The sensor
core also supports separate analog and digital gain for all four color channels (R, Gr, Gb, B).

 

Feature

  • The MT9D112 also has an embedded phase-locked loop oscillator (PLL) that can generate the internal sensor clock from the common wireless system clock. When in use, the PLL adjusts the incoming clock frequency up, allowing the MT9D112 to run at almost any desired resolution and frame rate within the sensor's capabilities.
  • It has numerous power-conserving features, including internal soft standby modes, hard, and an external SHUTDOWN that allows the internal power bus to be disabled.
  • It also includes a sequencer that coordinates all events triggered by the user. The sequencer manages autofocus, auto white balance, flicker detection, and auto exposure for the different operating modes, which include preview, still capture, video, and snapshot with flash.

 

Application

  • Cellular phones
  • PDAs
  • Toys
  • Other battery-powered products
  • Can be used in Arduino, Maple, ChipKit, STM32, ARM, DSP, FPGA platforms

 

Specification

  • Sensor:MT9D112
  • Optical Format: 1/4" 
  • Full Resolution:1600 x 1200 pixels (UXGA)
  • Pixel Size: 2.2 µm x 2.2 µm
  • Field of View (FOV): 50° (H) 
  • Maximum Frame rate: 15 fps at full resolution, 24 fps in preview mode, 30 fps in video mode
  • Board Size: 38mm x 38mm
  • Hole Pitch: Compatible with 29mm, 30mm, 34mm

 

Documentation

Datasheet

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account