Arducam OV5647 NoIR Camera Board /w M12x0.5 mount for Raspberry Pi 4/3B+/3 Camera

SKU
B0035
$29.99
Overview
  • IR Sensitivity: NOIR
  • High-Definition video camera for Raspberry Pi Model A or B, B+, model 2, Raspberry Pi 3,3b+
  • OmniVision OV5647 sensor in a fixed-focus module with replaceable Lense

Overview

The Pi NoIR is a Raspberry Pi camera module with no Infrared filter for night time and low light photography using an Infrared light. Useful for wildlife research, science projects, night time security or making artistic photo’s.

The Raspberry Pi camera module has been used for many things such as a security camera, for time lapse photography and even sent high up into the atmosphere on a weather balloon.

With the wide range of project Raspberry Pi’s are being used for, some users were finding that the camera was no good when it was being used in low light with an Infrared light source. Unfortunately for them the Raspberry Pi camera module has a Infrared filter built in which makes it unusable for their project. In response we come up with a camera module just for these type of projects called the Pi NoIR camera. It is the same as the standard camera module but without an IR filter.

Without the Infrared filter the camera can be used for night time photography, night time security or for any project where the scene will be lit by an IR light. Without a filter the camera sensor can see short wavelength IR light around 800nm which is the IR wavelengths not generated with heat but just beyond the visible red light in the spectrum.

The camera has the same specifications as the standard camera module but has a black circuit board so it can be told apart from the standard green camera board.

Applications

  • Home security
  • Science project
  • Robot cameras
  • Wildlife cameras
  • Night/Low Light photograph
  • Making artist photo, etc.

Specifications

Sensor Omnivision OV5647 sensor
Optical Size 1/4” (OV5647)
Resolution 5MP 2592×1944
Frame Rates 1080p 30 fps, 720p 60fps, 480p 90fps
IR Sensitivity without IR-cut filter
Field of View(FOV) 110°(H)
Focus Type Manual Focus
Lens Type M12 Lens
Dimension 36mm x 36mm
Peaking Current 300mA

Package Including

  • 1 x OV5647 NoIR Camera Board /w M12x0.5 mount for Raspberry Pi 
  • 1 x 15cm 15pin FPC cable
  • 1 x 15cm 15-22pin FPC cable

Note

  • Raspberry Pi board is not included in the package

Note for Supported Platform and OS
Platform Bookworm(rpicam) Bullseye(libcamera) Buster(raspistill)
Raspberry Pi 5    
Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W
Raspberry Pi CM3 / CM3+ / CM4
(extra adapter board required)

Documentation

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account