Arducam 8MP M12 Lens Drop-in Replacement for Raspberry Pi Camera Module V2 and NVIDIA® Jetson Nano/Xavier NX/AGX Orin/Orin Nano/Orin NX, IMX219 Sensor with Low Distortion Lens

Special Price $13.99 was $24.99
  • Easy installation: Just detach the original stock IMX219 module onboard and re-attach this replacement
  • Low Distortion: 70°(H) Low-Distortion (<3%) M12 Lens, minimize the image distortion and wide angle
  • Please note that the Raspberry Pi V2 Camera board is not included
  • Customized Service: please contact Arducam if you want to customize drop-in replacements for your Raspberry Pi Camera Module V2 with a different M12 lens in the thread or with NoIR (No InfraRed filter) Lens
  • -->


    This Arducam IMX219 low distortion lens camera module is designed mainly for Raspberry Pi V2 camera board and replace the default standard IMX219 camera module to get a low distortion of view (<3%). It can be used for drone, robot, action camera and 3D scanning applications.


    This camera relies on kernel drivers to work – one kernel version, one camera driver. Please refer to the Supported JetPack Version for Different NVIDIA Jetson Platforms to ensure compatibility.


    This camera is specifically designed for the official NVIDIA® Jetson™ Developer Kit by default and does not support third-party carrier boards.


    • Drone, robot
    • Action Camera
    • 3D scanning applications
    • Field animal camera
    • Recording slow motion
    • Machine vision, etc.



    Image Sensor IMX219
    Still Resolution 8 Megapixels
    Video Modes 1080p47, 1640 × 1232p41 and 640 × 480p206
    Sensor Resolution 3280 × 2464 pixels
    Sensor image area 3.68 x 2.76 mm (4.6 mm diagonal)
    Pixel Size 1.12 µm x 1.12 µm
    Optical Size 1/4"
    IR Sensitivity Integral IR-cut Filter, visible light only
    Supported Platform Raspberry Pi 5/4B/3B+/3/2/CM3/CM4/Zero W/Zero 2 W


    Focus Type Manual Focus
    Focal Length 2.8mm
    F.NO F2.8
    Field of View(FOV) 75°(H)
    Lens Mount M12 Mount


    Electrical & Mechanical

    CSI-2 Data Output 2-lane mode
    Peaking Current 300mA


    Package Including

    • 1 x Arducam IMX219 Low Distortion M12 Mount Camera Module


    • The package does not include any Raspberry Pi motherboard.
    • The drop-in replacement module does not include FPC cables and any camera boards. And it requires the use of the Raspberry Pi V2 camera board to function properly.
    • The lenses of all camera modules are not interchangeable. Please contact sales in advance if you need to replace them.
    Note for Supported Platform and OS
    Platform Bookworm(rpicam) Bullseye(libcamera) Buster(raspistill)
    Raspberry Pi 5    
    Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W  
    Raspberry Pi CM3 / CM3+ / CM4
    (extra carrier board required)



    Lens Options:

    SKU Format FOV on 1/4” sensor Focal Length
    LN006 1/4’’ 100° 1.8mm
    LN008 1/2.5’’ 140° 1.56mm
    LN011 1/2.5’’ 45° 4mm
    LN012 1/2.5’’ 55° 3.6mm
    LN013 1/2.7’’ 75° 2.8mm
    LN014 1/2.7’’ 90° 2.1mm
    LN015 1/4’’ 63° 3.2mm


    Write Your Own Review
    Only registered users can write reviews. Please Sign in or create an account