Arducam IMX219 Wide Angle NoIR IR sensitive Camera Module, drop-in replacement for Raspberry Pi V2 Camera and Jetson Nano Camera

Only 29 left
Special Price $12.99 was $29.99
  • Easy to Set-up: Just detach the IMX219 module onboard and re-attach this replacement gently and carefully
  • NoIR lens: Attached with a NoIR M12 Lens which can be used under low light condition
  • Wide Application: Drones, robots, action cameras and 3D scanning applications, so on
  • Please note that you will need a IMX219 camera module before purchasing the drop-in replacement


This Arducam IMX219 NoIR IR sensitive fisheye lens camera module is designed mainly for Raspberry Pi V2 camera board and replace the default standard IMX219 camera module to get much wide field of view. It can be used for drone, robot, action camera and 3D scanning applications.


This camera relies on kernel drivers to work – one kernel version, one camera driver. Please refer to the Supported JetPack Version for Different NVIDIA Jetson Platforms to ensure compatibility.


This camera is specifically designed for the official NVIDIA® Jetson™ Developer Kit by default and does not support third-party carrier boards.

This camera does not support the standard Raspberry Pi models (like Raspberry Pi 3/3B+/4).


For the Orin Nano/Orin NX, a 15-22 pin FFC(CB011)  is required. If you are using an AGX Orin, an additional camera adapter (B0472)  is required.


  • Cellular phones, PDAs, Toys
  • Other battery-powered products
  • Drone, robot
  • Action camera
  • 3D scanning applications
  • All Raspberry Pi platforms



Image Sensor IMX219
Still Resolution 8 Megapixels
Video Modes 1080p47, 1640 × 1232p41 and 640 × 480p206
Sensor Resolution 3280 × 2464 pixels
Sensor image area 3.68 x 2.76 mm (4.6 mm diagonal)
Pixel Size 1.12 µm x 1.12 µm
Optical Size 1/4"
IR Sensitivity without IR-cut filter, sensitive to IR light


Focus Type Manual Focus
Focal Length 1.3mm
F.NO F2.0
Field of View(FOV) 155°(H)×115°(V)×175°(D)
Lens Mount M12 Mount


Electrical & Mechanical

Peaking Current 300mA


Package Including

  • 1 x Arducam IMX219 NoIR IR sensitive Wide Angle Camera Module


  • Raspberry Pi V2 camera board is needed to work with this camera module.
  • Raspberry Pi board is not included in the package
  • There is no FPC Cable included in the package
  • This camera is released for the official NVIDIA® Jetson™ Developer Kit, and it does not guarantee to support other third-party boards.
  • The lens on this camera is not interchangeable, if you need to replace the lens, please contact sales in advance!


Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account