UCTRONICS 3.5 Inch Touchscreen for Raspberry Pi with Case


Here's another slightly upgraded alternative.

  • Support All Raspberry Pi Models: Designed for Raspberry Pi, can be directly inserted into Raspberry Pi 4 B, 3B+, 3B, 2B, B+, Pi Zero & w through GPIO pins, no extra power supply needed. NOTE: for Octoprint, please download the driver here.
  • Resolution: 320x480 (physical) with resistive touch control, the resolution can be adjusted when working with FBCP software driver.
  • Smoother Display: Support 125MHz SPI signal input without flicker; Up to 60fps refresh rate when working with Raspberry Pi, higher than most similar products, great for playing game and video.
  • More Features: Self input diagnose instead of the blank screen; Support manual backlight control; Hotplug support, without rebooting the Pi; Support dual-screen display (the Raspberry Pi can connect to another HDMI screen at the same time); Can work with Raspbian/Ubuntu/Kali/Retropie system, all support touch function.
  • Handy Screen with Perfect Case: the overall dimension of this tiny screen is 3.38”×2.20” (86mm×56mm), the exact size of a Pi; The acrylic case is customized for the screen and Raspberry Pi 4/3 B/B+, easy to access to all ports.

Item Description:

UCTRONICS U611101 is a 3.5” TFT LCD display with case, SPI interface and touchscreen support. It works with all standard Raspberry Pi models and supports operating systems like Raspbian, Ubuntu, Kali and RetroPie. Windows 10 IoT is NOT supported. 


  • Display: 3.5” (Diagonal)
  • Native Resolution: 480×320 pixels 
  • Video Input Support : 480×320 ~ 1920×1080(scaled) 
  • Video Interface: SPI 125MHz 
  • Dual Display Support : Yes, up to triple on Pi 4 
  • Power Input: Raspberry Pi GPIO power pins 
  • Dimensions: 85.6mm×55.98mm 
  • Touch Screen Support : Raspbian, Ubuntu, Kali, RetroPie
  • Raspberry Pi Support: Support all standard Raspberry Pi 
  • Display Refresh Rate: 60fps (MAX) 
  • Hotplug Support: Yes 
  • Backlight Control: On-board backlight switch 
  • Power consumption: 5V/150mA 
  • Working temperature: -10~55 C

Packing Including:

  • 1*UCTRONICS 3.5” SPI Pi screen
  • 1*Acrylic case set
  • 1*Stylus
  • 1*Instruction Manual

Note: The raspberry pi shown in the picture is not included!

Additional Resources: 

Case installation

You can refer to the following video on how to install the cases properly for the screen.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account