Arducam 12MP 477P Pan Tilt Zoom(PTZ) Camera for Raspberry Pi 4/3B+/3 and for NVIDIA® Jetson Nano/Xavier NX/AGX Orin/Orin Nano/Orin NX, IR-Cut Switchable Camera

SKU
B016712MP
$124.99
-
+
Overview
  • Compatibility: Compatibility with Raspberry Pi and Nvidia Jetson platform
  • Switchable IR Cut: Through software to achieve your day/night vision
  • Software Control: Programmable Autofocus control, pan/tilt/zoom keyboard control
  • Based on 12MP HQ Sensor for clearer images
  • PTZ Controller Board Connector Part Number: S6B-XH-A-1

Overview

Arducam PTZ camera is a complete solution to turn your Raspberry Pi/Jetson Nano/Xavier NX, and it is capable of remote directional and zoom control, so it could move the camera and the lens, which means a single camera can be used to monitor places that should be covered by multiple ones. You can save a lot of cost and time in purchasing and deploying the camera. What’s more, this kit is based on the IR-CUT switchable 13MP camera to get sharp imaging all day and night.

Currently, NVIDIA official has released the NVIDIA Jetson Orin series developer board. Based on it, we have also adapted the camera to the NVIDIA Jetson Orin kernel. 

KERNEL CAMERA DRIVER USED

This camera relies on kernel drivers to work – one kernel version, one camera driver. Please refer to the Supported JetPack Version for Different NVIDIA Jetson Platforms to ensure compatibility.

SUPPORTED PLATFORM DISCLAIMER

This camera is specifically designed for the official NVIDIA® Jetson™ Developer Kit by default and does not support third-party carrier boards.

ADDITIONAL ACCESSORY INSTRUCTIONS

The 22-22 pin FPC Cable is included in the package. But please note that: If you are using an AGX Orin, an additional camera adapter (B0473)  is required.

Applications

  • IoT cameras
  • Robot cameras
  • Wildlife cameras
  • Cellular phones, PDAs, Toys
  • Other security and surveillance projects

 

Specifications

Optical Size 1/2.3”
Pixel Size 1.55um x 1.55um
Active Pixels 12.3MP 4056(H)x3040(V)
Frame Rates

Frame Rate(Raspberry Pi): 2028 × 1080p50, 2028 × 1520p40 and 1332 × 990p120

NVIDIA Jetson Nano/Xavier NX/Orin NX/Orin Nano/AGX Orin:
L4t 32.x: 4032x3040@30fps, 3840x2160@30fps, 1920x1080@60fps
L4t 35.x: 4032x3040@20fps, 3840x2160@30fps, 1920x1080@60fps

Shutter Type Rolling Shutter
Focal Length 4.38-10.71mm±5%
F.NO W:1.6-T:3.3±5%
Focus Type Front group: focus Back group: Zoom
Field of View(FOV) 96° – 33° (Horizontal)
IR Sensitivity Optional with additional Motorized IR-Cut filter
Dimension  36mm x 36mm
Pan and Tilt Range 0-180°
Zoom Range (Wide => Tele) 2317 steps 0.00396mm/step
Focus Range(Near => Far) 3009 steps 0.0047mm/step

 

Package Including

  • 1 x Arducam PTZ Lens, assembled with a 12MP IR-CUT switchable camera board and camera control board
  • 1 x 15-Pin to 22-Pin Ribbon Cable (11.8 in/30 cm)
  • 1 x 22-Pin Ribbon Cable (11.8 in/30 cm)
  • 1 x XH2.54 Jumper wire with 6-Pin Female Connector (11.8 in/30 cm)

 

Note

  • Raspberry Pi board and Jetson board are not included in the package
  • This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, for the previous Raspberry Pi OS (Legacy) users, contact us at [email protected].
  • Note for Supported Platform and OS
    Platform Bookworm(rpicam) Bullseye(libcamera) Buster(raspistill)
    Raspberry Pi 5    
    Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W  
    Raspberry Pi CM3 / CM3+ / CM4
    (extra adapter board required)
     

Documentation

Video

Used on Raspberry Pi-Raspberry Pi Pan Tilt Zoom Camera Guide

Used on Jetson Nano/Xavier NX-Jetson Nano NX Pan Tilt Zoom Camera Guide

 

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account