Arducam Pan Tilt Camera for Raspberry Pi, 2 DOF Platform with 5MP 1080P Camera Board with PTZ Control Board

SKU
B0033PT
In stock
Only 980 left
$24.99
-
+
 

Item Description:

B0033PT is a new member of PTZ family, which can move your camera in two dimensions with 180 degrees horizontal and 145 degrees vertical movements. The PTZ camera controller board outputs the PWM signals to drive the servo motors directly. Therefore, B0033PT can be used to monitor places that should be covered by multiple ones commonly in the surveillance system.

Applications

  • IoT cameras
  • Robot cameras
  • Wildlife cameras
  • Other security and surveillance projects

Specifications

- Camera

  • Sensor: OV5647
  • Resolution: 5MP 2592H x 1944V
  • Frame Rate: [email protected], [email protected]
  • IR Sensitivity: Integral IR filter, visible light only
  • Field of View: 54°(H) x 41°(V)
  • Camera Board Dimension: 25mm x 24mm

- Digital Servo

  • Torque: 0.6 kg/cm at 3.6V, 0.8 kg/cm at 4.8V
  • Operating Speed: 0.13sec/60° at 3.6V, 0.09sec/60° at 4.8V
  • Operating Voltage: 3.6v~4.8v
  • Operating Current: <350mA
  • Dead Band: 3 usec
  • Dimension: 20mm x 8.75mm x 22mm

- Control Board

  • PWM Driver: PCA9685
  • PWM resolution: 12-bit
  • Ambient light sensor: TSL2581FN
  • Ambient light resolution: 16-bit
  • Communication interface: I2C
  • Operating voltage: 3.3V/5V
  • Dimension: 25mm x 61mm

Packing List

  • 1 x 5MP camera for Raspberry Pi with a 15cm camera cable for Raspberry Pi
  • 1 x 15 pin to 22 pin camera cable for Pi Zero&W
  • 2 x Digital servos
  • 1 set epoxy bracket pieces with screws
  • 1 x PWM control board
  • 4 x Female to female jumper wires (The wire has no fixed color)
  • 2 x Male to female jumper wires (The wire has no fixed color)

Additional Resource

VIDEO

The following video showcases installation and some simple use cases of the Pan Tile Camera Kit

 
 
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account