Arducam 8MP IMX219 Camera Module for Raspberry Pi, with Low Distortion 105°(D) FOV M12 Lens, Compatible with Raspberry Pi 5, 4B, Pi 3/3B+, Pi Zero 2W and More

SKU
B0394
Special Price $23.99 was $29.99
-
+
Overview
  • Wide Applications: Including time-laspe, slow motion, field phtotograph, 3D printer and so on.
  • Native to Raspberry Pi: No need to install additional driver for this camera
  • Higher Resolution: Support max 3280 × 2464 pixel still images
  • Ultra Low Distortion: Attached with a low distortion (<3%) M12 lens

Overview

This Arducam IMX219 camera module is mainly designed for Raspberry Pi. The highlight of this camera is its very low distortion (<3%) of the lens. No less than the Raspberry Pi official camera V2, this camera module is also equipped with a high-definition IMX219 8MP sensor for shooting HD video and still images.It is excellent in image quality, color fidelity, and low light, and supports still capture.For beginners, this is a very easy camera module to get started; for advanced players, this camera module has more knowledge that you should explore and DIY.


Applications

  • Astrophotography
  • Surveillance cameras
  • FA cameras
  • Industrial/Agricultural cameras
  • Autonomous mobile robots, UGV/UAV, ADAS, etc.

Features

  • Raspberry Pi Camera: Designed for Raspberry Pi, this 8MP HD camera module has a Sony IMX219 8MP pixel sensor with low distortion (<3%) M12 lens. EFL: 2.8mm, F.NO: 2.8, View Angle: 75 Deg. (Horizontal).
  • 8MP More than HD: Supports 3280 × 2464 pixel still images, and still captures. The Raspberry Pi Camera Board v2 - 8 Megapixels is a leap forward in image quality, color fidelity, and low light than the camera v1.
  • Wide Compatibility: The camera is compatible with all Raspberry Pi 1, 2, 3, and 4 models, and with Raspberry Pi Zero and Zero 2W, which can be easily used with a simple configuration.
  • Easy to setup: The package comes with a 15cm and 50cm 15pin FPC cable, and a 15cm yellow 15-22pin FPC cable for Raspberry Pi Zero and Zero 2W. Simply connect the Raspberry Pi board and camera with the FPC cable and you can easily use this 8MP high-quality camera.
  • Application: Easy to use for beginners, and for advanced gamers, it offers more to explore. Perfect for time-lapse, slow motion, home security applications, monitoring Octoprint 3D Printer, and wildlife camera trap applications.

Specifications

Camera

Image Sensor IMX219
Still Resolution 8 Megapixels
Video Modes 1080p47, 1640 × 1232p41 and 640 × 480p206
Sensor Resolution 3280 × 2464 pixels
Sensor image area 3.68 x 2.76 mm (4.6 mm diagonal)
Pixel Size 1.12 µm x 1.12 µm
Optical Size 1/4"
IR Sensitivity Integral IR-cut Filter, visible light only
Supported Platform Raspberry Pi 5/4B/3B+/3/2/CM3/CM4/Zero W/Zero 2 W

Lens

Focus Type Manual Focus
Focal Length 2.8mm
F.NO F2.8
Field of View(FOV) 88°(D) × 75°(H) × 60°(V)
Lens Mount M12 Mount
Distortion <3%

 

Electrical & Mechanical

Camera Board Size 24mm x 25mm
Peaking Current 300mA

 

Package Including

  • 1 x IMX219 Camera Module with Low Distortion M12 Lens
  • 1 x 15cm 15-22pin FPC cable
  • 1 x 15cm 22-22pin FFC cable

Notes

  • The package does not include any Raspberry Pi motherboard.
  • The drop-in replacement module does not include FPC cables and any camera boards. And it requires the use of the Raspberry Pi V2 camera board to function properly.
  • The lenses of all camera modules are not interchangeable. Please contact sales in advance if you need to replace them.
Note for Supported Platform and OS
Platform Bookworm(rpicam) Bullseye(libcamera) Buster(raspistill)
Raspberry Pi 5    
Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W  
Raspberry Pi CM3 / CM3+ / CM4
(extra carrier board required)


Documentation


Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account