Skip to the beginning of the images gallery

Arducam 8MP*4 Quadrascopic Camera Bundle Kit for Raspberry Pi, Nvidia Jetson Nano/Xavier NX, Four IMX219 Color Camera Modules and Camarray Camera HAT

SKU

B0396

Be the first to review this product

$139.99

Overview

Four in One: Combine four cameras into one frame, each camera with a resolution of 1640(H)x1232(V)
Wide Compatibility: Supports Raspberry Pi, Jetson Nano, Xavier NX and more
Native to Raspberry Pi and Jetson: No need to install additional driver
More Applications: Could be used for many use-cases (e.g., stitching, 3D sensing, tracking, …)
We have enabled VR (Virtual Reality), AR(Augmented Reality), and other applications like SLAM (Simultaneous Localization and Mapping)
For NVIDIA JetsonL4t 35.x Jetpack5.x and above versions , you will need the latest CamArray Kit firmware (no earlier than the 2023.02.03 version) to access it.(otherwise you can only use them on previous JetPack versions).

Details

Overview

This Arducam quadrascopic camera bundle incorporates four 8MP IMX219 cameras, and the cutting-edge MIPI stereo camera breakthrough from Arducam – The Arducam Camarray HAT.

As the upgraded version of Arducam Synched Stereo Camera HAT, the Camarray further pushes the multi-camera limits and doubles the interfacing capabilities to allow 4 synchronized MIPI camera modules to be interfaced to a single MIPI CSI-2 slot on prevailing single-board computers like Raspberry Pi, Jetson Nano, and Jetson Xavier NX.

Feature

Designed for Raspberry Pi Camera: This Quad- Camera kit allows you to connect four 8MP IMX219 raspberry pi cameras to a single standard pi board and capture images or video at the same time.
Four in One: Combine four cameras into one frame, each with a resolution of 1/4(820(H)x616(V)); the maximum output you can get: 3280 x 2464 for still images and 1920x1080 for video. Please note the frame rate for video and still images will drop to half the frame rate you would normally get with a single camera
Wide compatibility: It is compatible with the latest Raspberry Pi camera software (libcamera) and uses the official Pi camera tuning algorithm. It also supports multi-platform multi-camera solutions such as Raspberry Pi, Jetson Nano, Xavier NX, and many more.
Applications: Multiple camera processing technologies have enabled VR (Virtual Reality), AR(Augmented Reality), and other applications like SLAM (Simultaneous Localization and Mapping). Synchronized video streams with Raspberry Pi could be used for many use-cases (e.g., stitching, 3D sensing, tracking, …) before investing in an expensive video multiplexer hardware.

Specifications

Support Platform	Raspberry Pi/Nvidia Jetson
Output/CSI-2 Speed	x1 CSI-2 2-lane Output Port/1.0 Gbps/Lane
Output Format	RAW8/RAW10
ISP Support	Supported on Raspberry Pi
External Trigger	Not Support
Aggregate mode	1/4 Spelling Combine
Frame Rate(On Raspberry Pi)	103fps@640x480,20fps@1640x1232, 23fps@1920x1080,10fps@3280x2464
Frame Rate(On NVIDIA Jetson)*	L4t 32.x: [email protected], 1080p@15, 720p@30fps L4t 35.x: 3280×[email protected], 3280×1848@14fps, 1920×1080@15fps, 1640×1232@15fps, 1280×720@30fps
Image Sensor	Sony IMX219
Pixel Size	1.12 μm x 1.12 μm
Active Array Size	3280 x 2464
Optical Format	1/4”
Camera Interface	2-lane MIPI CSI-2
IR Sensitive	Integral IR Cut filter, Visible Light Only
Camera Board Size	24mm x 25mm
Camarray Hat Size	65mm x 55 mm
Default Lens Mount	Stock Lens
Effective Focal Length	3.04mm
FOV on 1/4” RPi Camera	62.2° (H), 48.8(V)

*: JetPack4.6/L4T32.6.1 on NVIDIA Jetson Nano/Xavier NX

Package Including

4 × IMX219 Camera Module
1 × Arducam Camarray HAT
4 × 15cm 22-22pin Camera FPC Cable
1 × 30cm 15-22pin Camera FPC Cable
1 × 30cm 22-22pin Camera FPC Cable
1 × 7cm 15-22pin Camera FPC Cable
1 × Screw Pack

Note

The package does not include any Raspberry Pi motherboard.
The drop-in replacement module does not include FPC cables and any camera boards. And it requires the use of the Raspberry Pi V2 camera board to function properly.
The lenses of all camera modules are not interchangeable. Please contact sales in advance if you need to replace them.

Note on Supported Raspberry Pi Boards and OS
Platform	Bookworm(rpicam)	Bullseye(libcamera)	Buster(raspistill)
Raspberry Pi 5	√
Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W	√	√
Raspberry Pi CM3 / CM3+ / CM4 (extra carrier board required)	√	√	√

Documentation

Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account