Arducam Upgraded Camera Pan Tilt Platform Compatible with Raspberry Pi Camera Module 3/V1/V2, Nvidia Jetson Nano/Xavier NX


Item Description

Arducam B0283 is a new member of the family, which is an upgraded version of B0227 with improved bracket quality and a mini customized control board. It can move the camera for pan and tilt directional control, and that means a single camera can be used to monitor places that should be covered by multiple ones.


  • Pan Tilt Kit: Specifically designed for a broader view on raspberry pi camera V3/V2/V1 and Arducam 16mp/64mp/Mini HQ cameras.
  • More Coverage: Free 180° panning and tilting in a smaller PT bracket. Work with all Raspberry Pi models, as well as on Jetson Nano NX and other platforms (RPi demo only).
  • Customized Control Board: I2C controlled, outputs the PWM signals to drive the servo motors directly, allowing the camera can be mounted in the base bracket.
  • Mini Digital Servos: Two GH-S37D digital servos for a faster speed, higher torque and better holding capability (than analog servos).
  • Only simple wiring for use. You'll be Getting: 1 set pan tilt bracket kit, 2 digital servo motors, a PTZ controller board (with 4 jumper wires), and a pack of screws.


Digital Servo

  • Torque: 0.6 kg/cm at 3.6V, 0.8 kg/cm at 4.8V
  • Operating Speed: 0.13sec/60° at 3.6V, 0.09sec/60° at 4.8V
  • Operating Voltage: 3.6v~4.8v
  • Operating Current: <350mA
  • Dead Band: 3 usec
  • Dimension: 20mm x 8.75mm x 22mm

Customized Control Board

  • PWM resolution: 12-bit
  • Communication interface: I2C
  • Operating voltage: 3V-5V
  • Dimension: 38mm x 28mm

Package Including 

  • 2 x Digital servos
  • 1 set upgraded bracket pieces
  • 1 x Customized control board
  • 4 x Female to female jumper wires (The wire has no fixed color)
  • 1 x Screws pack
  • 1 x Manual

Compatible with Multiple Cameras

The PT bracket is compatible with Raspberry Pi cameras that has the same size of the official raspberry pi Camera Module 3/V1/V2 and Arducam 16mp/64 mp/Mini HQ camera.

Arducam OV5647(B0033)/IMX219(B0390)/IMX477 Series (B0240)
Arducam 16MP camera (B0371)
Arducam 64MP camera (B0399)
Arducam Mini HQ camera (B0303R)

Note on Supported Raspberry Pi Boards and OS
Platform Bookworm(rpicam) Bullseye(libcamera) Buster(raspistill)
Raspberry Pi 5      
Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W  
Raspberry Pi CM3 / CM3+ / CM4
(extra carrier board required)


3D Drawing

User Guide

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account