Arducam for Raspberry Pi Camera Module with Case, 5MP 1080P for Raspberry Pi 3, 3 B+ and More

Overview

In order to meet the increasing need for Raspberry Pi compatible camera modules. The Arducam team now released another add-on mini camera module for Raspberry Pi series boards which is fully compatible with the official one.

The board itself is tiny, at around 25mm x 24mm, which makes it perfect for mobile or other applications where size and image quality are important. It connects to Raspberry Pi by way of a short ribbon cable. The camera is connected to the BCM2835/BCM2836 processor on the Pi via the CSI bus, a higher bandwidth link that carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi.

It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing with cameras.

Applications

• Cellular phones,PDAs,Toys
• Other battery-powered products
• Can be used in all Raspberry Pi platforms
• PC multimedia
• Digital still cameras,etc.

Specifications

Package Including

• 1 x 5MP Mini Camera OV5647 Sensor for Raspberry Pi official Board
• 1 x 15cm 15pin FPC cable
• 1 x ABS camera case
• 4 x M1.8*5 self-tapping screws

Documentations

• User Guide – Arducam 5MP OV5647 Standard Pi Camera
• Installation Guide – Arducam 5MP OV5647 Standard Pi Camera Module with case