Arducam IMX219 Wide Angle Camera Module for NVIDIA Jetson Nano/Xavier NX
SKU
B0179
Only 542 left
Special Price
$23.99
was
$35.99
Item Description:
This Arducam IMX219 camera module is mainly designed for NVIDIA® Jetson Nano and also can be used on other hardware like ARM, DSP, FPGA, etc. The highlight of this camera is its wide field of view.
Note: This camera is released for official Jetson Nano/Xavier NX boards and Raspberry Compute Module by default, and it does not support the standard Raspberry Pi models (like Raspberry Pi 3/3B+/4) and other third-party boards.
Features:
- More Than HD: This camera adopts 1/4” 8 Megapixel IMX219 sensor for sharp image, Max. still resolution is 3280 x 2464 pixels
- Wider Angle of View: This camera module has 175°(D) wide-angle M12 Lens, which provides a much wider Field of View compared to the stock lens on V2 camera module
- Frame Rates: [email protected], [email protected], [email protected]
- IR Sensitivity: Integral IR filter, visible light only; Focal Length: 2.5 mm; View Angle: 175(D) x 155(H) x 115(V)
Specification:
- Sony 8MP IMX219 Sensor
- Optical Format: 1/4 inch
- Frame Rate: [email protected], [email protected], [email protected]
- Data Format: RAW8/RAW10
- EFL: 2.5mm
- F.NO: 2.8
- Focus Type: Fixed Focus
- View Angle: 175(D) x 155(H) x 115(V)
- Interface: MIPI CSI-2 2-lane/4-lane
- IR Sensitivity: Integral IR Filter, visible light only
Lens Options:
| SKU | Format | FOV on 1/4” sensor | Focal Length |
| LN006 | 1/4’’ | 100° | 1.8mm |
| LN008 | 1/2.5’’ | 140° | 1.56mm |
| LN011 | 1/2.5’’ | 45° | 4mm |
| LN012 | 1/2.5’’ | 55° | 3.6mm |
| LN013 | 1/2.7’’ | 75° | 2.8mm |
| LN014 | 1/2.7’’ | 90° | 2.1mm |
| LN015 | 1/4’’ | 63° | 3.2mm |
Package Includes:
- 1pcs Arducam IMX219 Wide Angle Camera Module for NVIDIA Jetson Nano
- 1pcs 1.0mm pitch 15cm 15pin FPC cable
Additional Resources:
Write Your Own Review