Arducam 2MP AR0230 OBISP MIPI Camera Module for Jetson Nano
SKU
B0247
Only 46 left
$39.99
Overview
It Will be discontinued, only 12 units left.
Overview
Arducam 2MP OBISP MIPI camera features onboard ISP (Image Signal Processor) with extraordinary highlight contrast HDR performance with up to 96 dB dynamic range. It uses standard 22pin MIPIC SI-2 interface, and works seamlessly on Jetson Nano.
★ NOTE
This camera relies on kernel drivers to work – one kernel version, one camera driver. Up or downgrading your OS leads to a kernel bump, and you’ll need to re-install a matching driver.
The newest Raspberry Pi firmware does not support the OBISP MIPI driver anymore, it is not recommended to use this camera on Raspberry Pi. For the camera already purchased, we suggest you use it on Raspberry Pi firmware released before 2021 October.
Application
- Cellular phones
- Dgital still cameras
- PC cameras
- IoT cameras
- Facial Recognition
Features
- Resolution: 2MP 1920 x 1080
- Shutter Type: Rolling Shutter
- Color Type: Color
- IR Sensitivity: built-in 650nm IR filter, visible light only
- Night Vision Ability: Optional with proper lens combination
- Interface: 2-Lane MIPI CSI-2
- ISP Features: AWB, AE, Flip, Mirror, Gamma, Sharpness, Saturation etc
- Platform Support: Jetson Nano
Specifications
- Sensor Type: AR0230
- Pixel Size: 3.0um x 3.0um
- Optical Size: 1/2.7″
- Lens spec: M12 default(SKU:LN011), EFL: 4mm, FoV(H): 90°, F/NO: 2.8, Distortion: 3%
- Frame rate: [email protected]×1080/1280×720/640×480/320×240
- Responsivity: 4.0V /lux-sec
- SNRmax: 41dB
- Dynamic Range: Up to 96 dB
- Power Consumption: max [email protected]
- Temperature Range: -10 ~ 70°C
- Camera Driver: V4L2 Compliant driver for Jetson Nano
- Board Size: 40mm x 40mm
- Powerline Frequency: 50Hz, fixed
Package Contents
- 1pcs Arducam 2MP OBISP Camera Module
- 1pcs 80mm 22pin FPC cable
Documentation
Video
How to Purchase
Arducam OBISP MIPI Camara Module
Write Your Own Review