Overview
This Arducam 20MP IMX283 Camera module with C mount lens camera module is designed for OAK.
Specification
Camera
– Sensor: IMX283
– Optical Format: 1″
– Resolution: 5496 (H) x 3694 (V) 20MP
– Pixel Size: 2.40um x 2.40um
– IR Sensitivity: Integral IR-cut filter, visible light only
– Interface: 4-lane MIPI CSI-2
– Resolution & Frame Rate: 3840 x 2160@16fps, 5496 x 3694@5fps
– Default Lens Mount: 16mm C mount lens
Lens
– Format: 1 ”
– Focal Length: 16mm
– Aperture (F): F1.4-16
– Field of View (FOV): 48° (H)
– Mount: C Mount
– Back Focal Length: 17.53mm
– MOD: 0.2m
– Dimension: Φ39.00×50.00mm
– Weight: 165g
- Camera board
– Board Size: 38 × 38 mm
Package Contents
- 1 pcs 20MP IMX283 color camera module
- 1 pcs 150mm/5.9inch 22pin to 26pin camera cable(same side)
Resources
2D Size
Pin Definition
Pin No. | PIN NAME | TYPE | DESCRIPTION | Level |
---|---|---|---|---|
1 | DGND | Ground | Power ground | GND |
2 | MDN0 | Output | Pixel Data Lane0 Negative | 1.2V |
3 | MDP0 | Output | Pixel Data Lane0 Positive | 1.2V |
4 | DGND | Ground | Power ground | GND |
5 | MDN1 | Output | Pixel Data Lane1 Negative | 1.2V |
6 | MDP1 | Output | Pixel Data Lane1Positive | 1.2V |
7 | DGND | Ground | Power ground | GND |
8 | MCN | Output | Pixel Clock Output Form Sensor Negative | 1.2V |
9 | MCP | Output | Pixel Clock Output Form Sensor Positive | 1.2V |
10 | DGND | Ground | Power ground | GND |
11 | MDN2 | Output | Pixel Data Lane2 Negative | 1.2V |
12 | MDP2 | Output | Pixel Data Lane2 Positive | 1.2V |
13 | DGND | Ground | Power ground | GND |
14 | MDN3 | Output | Pixel Data Lane3 Negative | 1.2V |
15 | MDP3 | Output | Pixel Data Lane3 Positive | 1.2V |
16 | DGND | Ground | Power ground | GND |
17 | POWER-EN | Input | Power Enable | 3.3V/1.8V |
18 | NC/XCLK | I/O | NC/XCLK | 3.3V/1.8V |
19 | DGND | Ground | Power ground | GND |
20 | SCL | Input | SCCB serial interface clock input | 3.3V |
21 | SDA | I/O | SCCB serial interface data I/O | 3.3V |
22 | VCC | Power | 3.3V Power supply | POWER |