To help customers evaluate the cameras or build a prototype with your own circuits without dealing with fine pin pitch flex cable or soldering balls, Arducam released the evaluation kit with camera breakout boards and Arducam USB2/USB3 camera shield without writing a single line of code.
Arducam AR0234 Color Global Shutter Camera eliminates rolling shutter artifacts to better capture fast-moving objects. This camera can be used for dynamic capture of high-speed moving objects, real-time monitoring of factory machines, etc.
The highlight of the new USB2.0 camera shield is that it supports MIPI interface sensors without any MIPI adapter board. It has an onboard 16MByte hardware frame buffer, and overcomes the bandwidth and dropping frames issue when using the software frame buffer scheme.
| Sensor | 2.3MP AR0234 |
| Optical Size | 1/2.6'' |
| Pixel Size | 3μm(H)×3μm(V) |
| Number of effective pixels | 1920(H)×1200(V) |
| Frame Rate | [email protected] |
| Camera Interface | MIPI 2-Lane |
| Lens Type | M12 Lens |
| F.NO | 3.0 |
| Focal Length | 3.6mm |
| Field of View | 90°(H), 75°(V), 120°(D) |
| Shutter Type | Global Shutter |
| Color Filter | RGB |
| Output Format | RAW10 |
| Bandwidth | 480Mbps USB2.0 |
| I/O Voltage Standard | 3.3V |
| Power Consumption | 5V/300mA |
| Operation Temperature | -10℃～+55℃ |
| Camera Board Size | 38mm x 38mm |
| USB Camera Shield Size | 40mm x 40mm |
Does it support other image formats?
- With post-processing from the software side, yes.
Can I use it with Raspberry Pi & Jetson Nano?
- Yes, but we highly recommend using our high-res Pi/Jetson camera series.
Can I use custom resolutions & frame rates?
- Yes.
Does it support H.264/H.265 encoding?
-It depends on the hardware you are using the camera kit with.
