Select Your Currency :

Welcome to Uctronics.com!

Magento Commerce

Your Shopping Cart is Empty

X205 Expansion Board /w Antenna for Raspberry Pi B+ / Raspberry Pi 2 Model B

SKU:U4513

Be the first to review this product



$42.31

Availability: In stock

OR

X205 Expansion Board /w Antenna for Raspberry Pi B+ / Raspberry Pi 2 Model B

Click on above image to view full picture

More Views

  • X205 Expansion Board /w Antenna for Raspberry Pi B+ / Raspberry Pi 2 Model B
  • X205 Expansion Board /w Antenna for Raspberry Pi B+ / Raspberry Pi 2 Model B
  • X205 Expansion Board /w Antenna for Raspberry Pi B+ / Raspberry Pi 2 Model B
  • X205 Expansion Board /w Antenna for Raspberry Pi B+ / Raspberry Pi 2 Model B

Feature:

  • Input Voltage  6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
    RS232 serial 
    communications
     Control the Raspberry Pi over RS232 or connect to external serial accessories 
    RS485 serial 
    communications
    You will be able to have a communication port for your field bus directly connected to your RPi!
    It will allow up to 32 devices to communicate through the same data line over a cable length of up to
    4,000ft with a maximum data rate of 10Mbit/s.
    Audio 3.5mm MIC in jack 
    3.5mm stereo audio jack
    Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
    Wireless WiFi (IEEE 802.11b/g/n) with external antenna 
    IR sensor (38KHz)
    USB Storage Self-powered USB hub with 3 ports
    Real-time clock (RTC) Based on DS3231SN with included CR2032 battery (Note:The battery not included in this package)
    GPIO Control 8-channel Darlington driver chip  (ULN2803) allowing to control electronic circuits which require more
       current
    Misc Power output socket 
    Camera flex slot so camera can still be used with the expansion  board attached
    DIP switch to remove connection from RPi’s pin header
    Directly connected on top of the Raspberry Pi using the board GPIO header pins 
    No wiring nor soldering is required 
    Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards 
    Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B 
    Dimensions 85 x 56mm

Package Including:

  • 1pcs X205 expansion board
  • 1pcs USB adapter
  • 1pcs 2.4GHz WIFI antenna
  • 4pcs nylon spacers (M3 x 20mm)
  • 8pcs nylon screws  (M3 x 6mm)
  • Note:The raspberry pi Board not included in this package.

Use spaces to separate tags. Use single quotes (') for phrases.


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tell us what you think about this item!