Select Your Currency :

Welcome to!

Magento Commerce

Your Shopping Cart is Empty

UCTRONICS Starter Kit Power Adapter HDMI cable Case for Raspberry Pi 3 Module B


Be the first to review this product


Availability: In stock


UCTRONICS Starter Kit Power Adapter HDMI cable Case for Raspberry Pi 3 Module B

Click on above image to view full picture

More Views



  • UCTRONICS Ultimate starter kit is especially designed for the starters who are interested in Raspberry Pi. The kit includes a 16GB SD Card, a GPIO T Board, a Breadboard, Power Supply Adapter Charger, High Speed HDMI Cable, ABS Protective Case, USB cable with ON/OFF switch, Push Button Switches, M/M Jumper Wires, M/F Jumper Wires, Colorful LED, 220 Ohm Resistors, 10K Ohm Resistors as well as the UCTRONICS Quick-Start Guide (link for download)


  • 16GB Micro SD Pre-Loaded with the Raspberry Pi Raspbian which is the easiest way to get started with the Raspberry Pi. Large memory space provides a better experience for operations and extensive applications
  • T Type 40pin GPIO Board connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pins out to breadboard-friendly arrangement and spacing. True full size solderless breadboard with 2 split power buses, 10 columns, and 63 rows - a total of 830 tie in points. Accept wire sizes in the range of 20-29AWG
  • 1.5m latest high speed HDMI Cable with Ethernet and 3D support to connect RPi to HDMI monitor or TV, 5V 2.5A Power Supply Adapter Charger (US), 10pcs 220 Ohm Resistors and 5pcs 10K Ohm Resistors are able to protect the LED from being overloaded
  • With the UCTRONICS Ultimate starter kit for Raspberry Pi, you will be able to get your Raspberry Pi 3 as your own credit card sized computer, getting started with programming and coding, making simple electronic circuits with the included electronic parts


Package Including: 

  • 1pcs 16GB Micro SD Pre-Loaded with Raspbian
  • 1pcs Power Supply Adapter Charger 5V 2.5A (US)
  • 1pcs USB cable with ON/OFF switch
  • 1pcs ABS Protective Case Enclosure
  • 1pcs Premium High Speed HDMI Cable
  • 3pcs Heatsink kit with Thermal Pad (1pcs 9x9x5mm Heat Sink and 2pcs 14x14x6mm Heat Sinks)
  • 1pcs T type 40pin GPIO Board
  • 1pcs 20cm FC40 40pin GPIO cable
  • 1pcs 830 Tie Point Solderless Breadboard
  • 40pcs M/M Jumper Wires (20cm)
  • 20pcs M/F Jumper Wires (20cm)
  • 1pcs RGB LED
  • 2pcs Red LEDs
  • 2pcs Green LEDs
  • 2pcs Yellow LEDs
  • 2pcs Blue LEDs
  • 2pcs Push Button Switches
  • 10pcs 220 Ohm Resistors
  • 5pcs 10K Ohm Resistors 

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tell us what you think about this item!